2016/08 SY0-401: CompTIA Security+ Certification Exam Questions New Updated Today!

Free Instant Download SY0-401 Exam Dumps(PDF & VCE) 1867Q&As from Braindump2go.com!
100% Real Exam Questions!     100% Exam Pass Guaranteed!

NEW QUESTION 91 – NEW QUESTION 100:

1.|2016/08 SY0-401 Exam Dumps(PDF & VCE) 1867Q&As Download:http://www.braindump2go.com/sy0-401.html

2.|2016/08 SY0-401 Exam Questions & Answers:https://drive.google.com/folderview?id=0B75b5xYLjSSNTldvc1ZkQlNUc0k&usp=sharing

QUESTION 91
A security administrator wishes to increase the security of the wireless network. Which of the following BEST addresses this concern?

A.    Change the encryption from TKIP-based to CCMP-based.
B.    Set all nearby access points to operate on the same channel.
C.    Configure the access point to use WEP instead of WPA2.
D.    Enable all access points to broadcast their SSIDs.

Answer: A
Explanation:
CCMP makes use of 128-bit AES encryption with a 48-bit initialization vector.
This initialization vector makes cracking a bit more difficult.

QUESTION 92
The security administrator has been tasked to update all the access points to provide a more secure connection. All access points currently use WPA TKIP for encryption.
Which of the following would be configured to provide more secure connections?

A.    WEP
B.    WPA2 CCMP
C.    Disable SSID broadcast and increase power levels
D.    MAC filtering

Answer: B
Explanation:
CCMP makes use of 128-bit AES encryption with a 48-bit initialization vector.
This initialization vector makes cracking a bit more difficult.

QUESTION 93
A system administrator wants to enable WPA2 CCMP.
Which of the following is the only encryption used?

A.    RC4
B.    DES
C.    3DES
D.    AES

Answer: D
Explanation:
Cipher Block Chaining Message Authentication Code Protocol (CCMP) makes use of 128-bit AES encryption with a 48-bit initialization vector.

QUESTION 94
Jane, an administrator, needs to make sure the wireless network is not accessible from the parking area of their office. Which of the following would BEST help Jane when deploying a new access point?

A.    Placement of antenna
B.    Disabling the SSID
C.    Implementing WPA2
D.    Enabling the MAC filtering

Answer: A
Explanation:
You should try to avoid placing access points near metal (which includes appliances) or near the ground. Placing them in the center of the area to be served and high enough to get around most obstacles is recommended. On the chance that the signal is actually traveling too far, some access points include power level controls, which allow you to reduce the amount of output provided.

QUESTION 95
A security team has identified that the wireless signal is broadcasting into the parking lot.
To reduce the risk of an attack against the wireless network from the parking lot, which of the following controls should be used? (Select TWO).

A.    Antenna placement
B.    Interference
C.    Use WEP
D.    Single Sign on
E.    Disable the SSID
F.    Power levels

Answer: AF
Explanation:
Placing the antenna in the correct position is crucial. You can then adjust the power levels to exclude the parking lot.

QUESTION 96
Which of the following would Pete, a security administrator, do to limit a wireless signal from penetrating the exterior walls?

A.    Implement TKIP encryption
B.    Consider antenna placement
C.    Disable the SSID broadcast
D.    Disable WPA

Answer: B
Explanation:
Cinderblock walls, metal cabinets, and other barriers can reduce signal strength significantly. Therefore, antenna placement is critical.

QUESTION 97
Ann, a security administrator, has concerns regarding her company’s wireless network.
The network is open and available for visiting prospective clients in the conference room, but she notices that many more devices are connecting to the network than should be.
Which of the following would BEST alleviate Ann’s concerns with minimum disturbance of current functionality for clients?

A.    Enable MAC filtering on the wireless access point.
B.    Configure WPA2 encryption on the wireless access point.
C.    Lower the antenna’s broadcasting power.
D.    Disable SSID broadcasting.

Answer: C
Explanation:
Some access points include power level controls that allow you to reduce the amount of output provided if the signal is traveling too far.

QUESTION 98
After reviewing the firewall logs of her organization’s wireless APs, Ann discovers an unusually high amount of failed authentication attempts in a particular segment of the building. She remembers that a new business moved into the office space across the street. Which of the following would be the BEST option to begin addressing the issue?

A.    Reduce the power level of the AP on the network segment
B.    Implement MAC filtering on the AP of the affected segment
C.    Perform a site survey to see what has changed on the segment
D.    Change the WPA2 encryption key of the AP in the affected segment

Answer: A
Explanation:
Some access points include power level controls that allow you to reduce the amount of output provided if the signal is traveling too far.

QUESTION 99
An administrator wants to establish a WiFi network using a high gain directional antenna with a narrow radiation pattern to connect two buildings separated by a very long distance. Which of the following antennas would be BEST for this situation?

A.    Dipole
B.    Yagi
C.    Sector
D.    Omni

Answer: B
Explanation:
A Yagi-Uda antenna, commonly known simply as a Yagi antenna, is a directional antenna consisting of multiple parallel dipole elements in a line, usually made of metal rods. It consists of a single driven element connected to the transmitter or receiver with a transmission line, and additional parasitic elements: a so-called reflector and one or more directors. The reflector element is slightly longer than the driven dipole, whereas the directors are a little shorter. This design achieves a very substantial increase in the antenna’s directionality and gain compared to a simple dipole.

QUESTION 100
A company has recently implemented a high density wireless system by having a junior technician install two new access points for every access point already deployed.
Users are now reporting random wireless disconnections and slow network connectivity.
Which of the following is the MOST likely cause?

A.    The old APs use 802.11a
B.    Users did not enter the MAC of the new APs
C.    The new APs use MIMO
D.    A site survey was not conducted

Answer: D
Explanation:
To test the wireless AP placement, a site survey should be performed.


!!!RECOMMEND!!!

1.|2016/08 SY0-401 PDF Dumps & VCE Dumps 1867Q&As Download:

http://www.braindump2go.com/sy0-401.html

 

2.|2016/08 SY0-401 Questions & Answers:

 https://drive.google.com/folderview?id=0B75b5xYLjSSNTldvc1ZkQlNUc0k&usp=sharing